Power supply unit (PSU)
6.4.2.3
Installing a dummy cover
Ê Install the dummy cover, see section
page
110.
6.4.3
Replacing an FJBU
Customer Replaceable Unit
(CRU)
Tools: tool-less
6.4.3.1
Preliminary steps
"Locating the defective server" on page 47
Ê
6.4.3.2
Removing the defective FJBU
Ê Remove the FJBU, see section
6.4.3.3
Installing the new FJBU
Ê Install the FJBU, see section
6.4.3.4
Concluding steps
Ê No steps needed.
6.5
Converting a standard power supply to a
redundant power supply
The standard power supply can be replaced by a redundant power supply. The
redundant power supply consists of up to two hot-plug PSUs. The upgrade kit
contains only one hot-plug PSU, for PSU redundancy the second hot-plug PSU
must be additionally ordered.
The upgrade kit for the redundant power supply consists of the following parts:
120
"Removing an FJBU" on page
"Installing the FJBU" on page
Upgrade and Maintenance Manual
"Installing a dummy cover" on
Hardware: 5 minutes
119.
118.
TX1320 M4