Removing The Heat Sink Variant 2 - Fujitsu PRIMERGY TX1320 M4 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY TX1320 M4:

Table of Contents

Processor (CPU)

This may be necessary due to the adhesive quality of the thermal

paste located between the heat sink and CPU.

Pay special attention not to damage any system board components

surrounding the CPU socket.

Ê Lift the heat sink out of the chassis.

Ê Clean residual thermal paste from the CPU surface using a lint-free cloth

and store the CPU in a save place.

11.2.3 Removing the heat sink variant 2

Figure 119: Removing the heat sink variant 2

Upgrade and Maintenance Manual

Table of Contents