– PSU cage with power distribution board (incl. power cables)
– one hot-plug PSU
– dummy cover (if only one hot-plug PSU is installed, you have to install the
dummy cover in the second bay)
– several screws
Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
6.5.1
Preliminary steps
"Suspending BitLocker functionality" on page 67
Ê
"Shutting down the server" on page 49
Ê
"Disconnecting the power cord" on page 50
Ê
"Getting access to the component" on page 51
Ê
6.5.2
Removing the standard PSU
Ê Remove the standard PSU, see section
PSU" on page
TX1320 M4
99.
Upgrade and Maintenance Manual
Power supply unit (PSU)
Hardware: 10 minutes
"Removing the defective standard
121