Locating The Defective Component - Fujitsu PRIMERGY TX1320 M4 Upgrade And Maintenance Manual

Basic hardware procedures
– Global Error (for non CSS components) events that need to be resolved by
maintenance personnel
– Customer Self Service (for CSS components) error events that may be
resolved by operating personnel
The Global Error indicator and the CSS indicator can be found on the front side
and the rear side of the server.
I
In same cases the indicator on the rear is designed as a combined
indicator (Global Error, ID and CSS indicator).
I
The indicators also light up in standby mode and after a server restart
due to a power failure.
Ê Check the Global Error indicator and the CSS indicator.
4.1.3

Locating the defective component

After determining the error class by the CSS indicator or the Global Error
indicator (see section
the components and onboard indicators on the system board allow you to
identify the defective component.
I
For more information, see the "ServerView Suite Local Service Concept
(LSC)" manual.
Possibilities to get more information about the defective component
Checking the ServerView System Monitor, available on Windows or Linux
●
based servers with ServerView agents installed.
I
For more information, see the "ServerView System Monitor" user
guide.
Checking the System Event Log (SEL), see section
●
the System Event Log (SEL)" on page
Checking the indicators on the components, see section
●
indicators" on page
Checking the onboard indicators on the system board using the Indicate
●
CSS button, see section
page 49.
48
"Determining the error class" on page
319.
"Using the CSS button on the system board" on
Upgrade and Maintenance Manual
"Viewing and clearing
84.
47), indicators on
"Connectors and
TX1320 M4