Inch Hdd Configurations; Configuration With Up To Two 3.5-Inch Hdds - Fujitsu PRIMERGY TX1320 M4 Upgrade And Maintenance Manual

7.3

3.5-inch HDD configurations

7.3.1

Configuration with up to two 3.5-inch HDDs

Figure 51: Configuration with up to two 3.5-inch HDDs
The HDD numbering as listed in the ServerView RAID Manager:
Position Logical drive number ServerView RAID Manager display name
[0]
[1]
SAS connectivity
Controller
Onboard SATA
SAS controller
I
For the cable plan, see chapter
TX1320 M4
Hard disk drives (HDD) and solid state drives (SSD)
0
1
Channel
Connect the mSAS connector of the SATA Y-
1
cable to system board connector "SATA1-4.
Connect the mSAS connector of the SATA Y-
1
cable to SAS controller connector "MLC1".
Upgrade and Maintenance Manual
Vendor Product (0)
Vendor Product (1)
Connection
"Appendix B" on page 341.
133