Toro Multi Pro WM 41240 Operator's Manual page 57

Figure 76
1. Agitation bypass valve
12. Press the switch to the Off position, shift
PUMP
the throttle lever to the Idle position, and turn
the switch Off.
IGNITION
Adjusting the Master Boom
Bypass Valve
Note:
Adjusting the master boom bypass valve
reduces or increases the amount of flow sent to the
agitation nozzles in the tank when the
switch is set to the Off position.
1. Ensure that the sprayer tank is filled with water.
2. Set the parking brake.
3. Set the transmission as follows:
•
For HD-Series Models with a manual
transmission—shift the transmission to
Neutral
•
For the HDX-Auto model—shift the
transmission to P (park).
4. Set the switch to the On position.
PUMP
5. Set the
AGITATION
6. Set the
MASTER BOOM
7. Set the engine speed as follows:
•
For machines without the optional throttle
lock—have 1 person press down on the
accelerator pedal until maximum engine
speed is reached.
Note:
The other person will collect samples
from the sprayer nozzles.
•
For machines with the optional throttle
lock, press down on the accelerator pedal
2. Master boom bypass
MASTER BOOM
switch to the On position.
switch to the Off position.
until maximum engine speed is reached
and set the throttle lock; refer to operation
instructions for your Workman hand throttle
kit.
8. Adjust the master boom bypass handle to
control the amount of agitation occurring in the
tank (Figure
9. Reduce the throttle speed to idle.
10. Set the
AGITATION
Off position.
11. Shut off the machine.
g028531
57
76).
switch and
PUMP
switch to the