Toro Multi Pro WM 41240 Operator's Manual page 44

of the sprayer through the InfoCenter in the
Automatic mode.
Note:
An icon for the application rate will appear
in the display of the InfoCenter.
•
Press the
SPRAYER
control the application rate of the sprayer by hand
in the Manual mode.
Note:
When switching from the Automatic mode
to the Manual mode, the icon for the application
rate will disappear in the display.
Switching between Sprayer Programming
Settings
Figure 56
1. Left and center
buttons—selecting
application rate 1
2. Icon—application rate 1
3. Icon —application rate 2
•
To select application rate 1, press the left 2 buttons
of the InfoCenter (Figure
Note:
An icon
•
To select application rate 2 (application rate),
press the right 2 buttons
Note:
An icon
•
To temporarily apply a boost application rate,
press and hold the 2 outer buttons
- switch to the right to
MODE
4. Center and right
buttons—selecting
application rate 2
5. Left and right
buttons—selecting
application rate boost
6. Icon —application rate
boost
56).
will appear.
(Figure 56).
will appear.
(Figure
Note:
An icon
Note:
The application rate boost is an additional
percent above the active program (1 or 2)
application rate. Press and hold the buttons to
apply the boost application rate; release the
buttons to stop the boost rate.
Programming the Application Rate
and Application Rate Boost
HDX-Auto Model
Programming the Application Rate 1 and 2
1. From the Home screen, press the center
selection button to navigate to the Main Menu.
2. If needed, press the center selection button to
highlight the application rate for sprayer program
1 (Figure
Note:
looks like the numeral 1 in a circle to the right of
a bull's-eye target.
g028507
3. Press the right selection button to select sprayer
program 1 (A of
4. Set the numerical value by pressing the following
selection buttons:
•
Press the right selection button (B of
57) to move the cursor to the next numerical
position to the right.
•
Press the center selection button (C of
56). 57) to increase the numerical value (0 to 9)
44
will appear.
57).
The icon for sprayer application rate 1
Figure 57
Figure 57).
g028512
Figure
Figure