Toro Multi Pro WM 41240 Operator's Manual page 46

Note:
Holding the button down will increase the
value of the tank alert by 10%.
5. Press the left selection button to save and return
to the main menu
Entering the PIN into the InfoCenter
Note:
Entering the PIN allows you to change the
access protected settings and maintain the password.
Note:
The factory entered PIN number is 1234.
1. From the Main Menu, press the center selection
button to navigate to the Settings menu.
2. Press the center selection button to highlight the
Protected Menus setting.
3. Press the right select button to select Protected
Menus (A of Figure
4. Set the numerical value in the PIN entry screen
by pressing the following selection buttons:
•
Press the center selection button (B of
61) to increase the numerical value (0 to 9)
•
Press the right selection button (C of
61) to move the cursor to the next numerical
position to the right.
5. Once the right-most value is set, press the right
selection button.
Note:
The checkmark icon will appear above
the center selection button (D of
6. Press the center selection button (D of
61) to enter the password.
Figure 61
61).
Figure
Changing the PIN
1. Enter the current PIN; refer to steps
6 in
46).
2. From the Main Menu, press the center selection
button to navigate to the Settings menu.
3. Press the center selection button to highlight the
Protected Menus setting.
4. Press the right select button to select Protected
Menus (A of
g028522 5. Enter the new PIN into the entry screen by
pressing the following selection buttons:
•
Press the center selection button (B of
62) to increase the numerical value (0 to 9)
•
Press the right selection button (C of
62) to move the cursor to the next numerical
position to the right.
Figure
6. Once the right-most value is set, press the right
selection button.
Figure
Note:
center selection button (D of
7. Wait until the InfoCenter displays the "value
saved message" and the red indicator light
illuminates.
61).
Figure
46
Entering the PIN into the InfoCenter (page
Figure 62
Figure 62).
The Save icon will appear above the
1 through
g028717
Figure
Figure
Figure 62).