Toro Multi Pro WM 41240 Operator's Manual page 40

LCD display shows an icon above each button that
indicates its current function.
Starting the InfoCenter
1. Insert the key into the
it to the On position.
Note:
The InfoCenter will illuminate and display
the initialization screen
2. After approximately 15 seconds, the home
screen will appear, press the center selection
button to display the information context
50).
•
Press the center selection button again to
navigate to the Main Menu.
•
Right selection button: Total area sprayed
(A of Figure 51)
•
Right selection button: Application rate (B
of Figure 51)
•
Left selection button: Sub-area sprayed (C
of Figure 51)
•
Left selection button: Tank volume (D of
Figure 51)
switch and rotate
STARTER
(Figure 49).
Figure 49
Figure 50
g028527
Note:
Rotating the
position and starting the engine will cause the values
indicated in the InfoCenter display to reflect the
running machine.
(Figure
Accessing the Settings Menu
1. Start the InfoCenter; refer to
InfoCenter (page
Note:
2. Press the center selection button to access the
Information context.
Note:
3. Press the center selection button to access the
Main Menu
g028528
40
Figure 51
switch to the start
STARTER
40).
The Home screen will display.
The information context icon will display
(Figure 52).
g029189
Starting the