Maintenance - Toro Multi Pro WM 41240 Operator's Manual

•
When operating with a heavy load, reduce your
speed and allow for sufficient braking distance. Do
not suddenly apply the brakes. Use extra caution
on slopes.
•
Be aware that heavy loads increase your stopping
distance and reduce your ability to turn quickly
without tipping over.

Maintenance

•
Only permit qualified and authorized personnel to
maintain, repair, adjust, or inspect the vehicle.
•
Before servicing or making adjustments to the
machine, stop the engine, set the parking brake,
and remove the key from the ignition to prevent
someone from accidentally starting the engine.
•
Empty the tank before tilting or removing sprayer
from vehicle and before storage.
•
Never work under a sprayer without using tank
support prop rod.
•
Make sure all hydraulic line connectors are tight,
and all hydraulic hoses and lines are in good
condition before applying pressure to the system.
•
Keep body and hands away from pin hole leaks
that can eject hydraulic fluid under high pressure.
Use paper or cardboard, not hands, to search for
leaks.
DANGER
Hydraulic fluid escaping under pressure
can have sufficient force to penetrate skin
and do serious damage.
If fluid is injected into the skin it must be
surgically removed within a few hours by
a doctor familiar with this form of injury or
gangrene may result.
•
Before disconnecting or performing any work on
the hydraulic system, all pressure in system must
be relieved by stopping engine, cycling dump
valve from raise to lower and/or lowering the tank
and attachments. If the tank must be in the raised
position, secure it with the safety support.
•
To make sure entire machine is in good condition,
keep all nuts, bolts and screws properly tightened.
•
To reduce potential fire hazard, keep the engine
area free of excessive grease, grass, leaves and
accumulation of dirt.
•
If the engine must be running to perform a
maintenance adjustment, keep hands, feet,
clothing, and any parts of the body away from the
engine and any moving parts. Keep everyone
away.
•
Do not overspeed the engine by changing the
governor settings. The maximum engine speed is
3650 rpm. To assure safety and accuracy, have
an Authorized Toro Distributor check maximum
engine speed with a tachometer.
•
If major repairs are ever needed or assistance is
required, contact an Authorized Toro Distributor.
•
To be sure of optimum performance and safety,
always purchase genuine Toro replacement
parts and accessories. Replacement parts and
accessories made by other manufacturers could
be dangerous. Altering this vehicle in any manner
may affect the vehicle's operation, performance,
durability or its use may result in injury or death.
Such use could void the product warranty of The
Toro® Company.
•
This vehicle should not be modified without
The Toro® Company's authorization. Direct
any inquiries to The Toro® Company,
Commercial Division, Vehicle Engineering Dept.,
300 West 82nd St., Bloomington, Minnesota
55420–1196. USA
•
Refer to your vehicle's Operator's Manual for other
maintenance.
8