Clevis Pin; Hairpin - Toro Multi Pro WM 41240 Operator's Manual

Note:
Ensure that the turrets for the sprayer
nozzles are facing rearward.
4. Assemble hinge plate to the triangular plate
using 4 flanged-head bolts, 4 backing plates,
and 4 flanged locknuts, that you removed in step
1, as shown in Figure
5. Torque the nuts bolts and nuts to 37 to 45 N-m
(27 to 33 ft-lb).
6. Align the rod end of the boom lift cylinder with
the holes in the horn of the pivot bracket
30).
Figure 31
1. Rod end (boom lift
cylinder))
2. Horn (pivot bracket)
7. Secure the rod end to the pivot bracket with a
clevis pin and a hairpin
8. Repeat step 1 through
center-boom assembly with the opposing boom
section.
Note:
Before you finish this procedure, ensure
that all of turrets for the spray nozzles are facing
rearward.
30.
(Figure
g028738
3. Clevis pin (5/8 x 4-3/4
inch)

4. Hairpin

(Figure 30).
5 on the other side of the
28