Toro Multi Pro WM 41240 Operator's Manual page 68

Figure 90
1. Flange (pressure filter
head)
2. Manifold (agitation valve)
3. Flange (bypass
valve—agitation valve)
4. Clamp
2. Remove the flanged-head bolt and flanged
locknut that secures the agitation valve to the
valve mount and remove the valve manifold from
the machine (Figure
Figure 91
1. Flanged-head bolt
2. Manifold (agitation valve)
5. Gasket
6. 3-pin connector (valve
actuator—agitation valve)
7. Flange (master boom
valve)
91).
3. Valve mount
4. Flanged locknut
Removing the Master Boom
Manifold Valve
1. Remove clamps and gaskets that secure the
manifold for the master boom valve
to the master boom bypass valve, agitation
valve, and 90° flanged elbow (at the end of the
hose for the flow meter).
Note:
Retain the clamp(s) and gasket(s)for
installation in
Manifold Valve (page
g028532
1. Flange (bypass—master
boom valve)
2. Flange (agitation valve)
3. Clamp
4. Gasket
2. Remove the flanged-head bolt and flanged
locknut that secure the master boom valve to
the valve mount and remove the valve manifold
from the machine
g028533
68
(Figure
Installing the Master Boom
73).
Figure 92
5. 90° flanged elbow
6. 3-pin connector (valve
actuator—master boom
valve)
7. Manifold (master boom
valve)
(Figure 93).
92)
g028534