Toro Multi Pro WM 41240 Operator's Manual page 22

Figure 18
1. Hairpin
2. Pivot pin (control console)
3. Install the hand knob and tighten it to prevent the
console from rotating during operation
18).
Installing the Control Console
Electrical Harness to the Machine
1. Install 2 J-clips in the center console at the
points located in
the existing screws.
Figure 19
HD-Series models with an manual transmission
1. J-clip
2. Existing screws
3. Control mounting bracket
4. Hand knob
(Figure
Figure 19 or Figure 20
3. Control-box harness
4. Center console
1. Center console
2. J-clip
g028852
2. Install a J-clip behind the passenger seat using
a bolt (1/4 x 1/2 inch) and a flanged nut (1/4
inch)
using
1. J-clip
3. Secure the control console harness to the
console and ROPS cover using the J-clips
(Figure
g002507
22
Figure 20
HDX-Auto Model
3. Existing screws
4. Control-box harness
(Figure 21).
Figure 21
21).
g028443
g024089