IBM Storwize V7000 Unified Problem Determination Manual page 116

The following illustration shows the cabling information for the configuration cable
in the file module:
Configuration cable
Figure 17. Configuration cable
The following illustration shows the internal routing for the hard disk drive power
cable.
®
Figure 18. Power cable connection
SAS/SATA
backplane
power cable
The following illustration shows the internal routing and connectors for the two
SAS signal cables.
Note:
1. To connect the SAS signal cables, make sure that you first connect the signal
2. To disconnect the SAS signal cables, make sure that you first disconnect the
96
Storwize V7000 Unified: Problem Determination Guide 2073-720
cable, and then the power cable and configuration cable.
power cable, and then the signal cable and configuration cable.