IBM Storwize V7000 Unified Problem Determination Manual page 92

Note: Values in the following table such as "5D" are the same as the "5DH"
displayed in the tool; some values such as "0" might have additional padding, so
that "0" will be the same as "00."
72
Storwize V7000 Unified: Problem Determination Guide 2073-720
Table 23. SMART ASC/ASCQ error codes and messages
ASC ASCQ Description
00 00 NO ADDITIONAL SENSE INFORMATION
00 06 I/O PROCESS TERMINATED
00 16 OPERATION IN PROGRESS
00 17 CLEANING REQUESTED
00 1D ATA PASS THROUGH INFORMATION AVAILABLE
00 1E CONFLICTING SA CREATION REQUEST
00 1F LOGICAL UNIT TRANSITIONING TO ANOTHER POWER
CONDITION
01 00 NO INDEX/SECTOR SIGNAL
02 00 NO SEEK COMPLETE
03 00 PERIPHERAL DEVICE WRITE FAULT
04 00 LOGICAL UNIT NOT READY
04 01 LOGICAL UNIT IS IN PROCESS OF BECOMING READY
04 02 LOGICAL UNIT NOT READY, INITIALIZING COMMAND REQUIRED
04 03 LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED
04 04 LOGICAL UNIT NOT READY, FORMAT IN PROGRESS
04 05 LOGICAL UNIT NOT READY, REBUILD IN PROGRESS
04 06 LOGICAL UNIT NOT READY, RECALCULATION IN PROGRESS
04 07 LOGICAL UNIT NOT READY, OPERATION IN PROGRESS
04 09 LOGICAL UNIT NOT READY, SELF-TEST IN PROGRESS
04 0A LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC ACCESS STATE
TRANSITION
04 0B LOGICAL UNIT NOT ACCESSIBLE, TARGET PORT IN STANDBY
STATE
04 0C LOGICAL UNIT NOT ACCESSIBLE, TARGET PORT IN
UNAVAILABLE STATE
04 10 LOGICAL UNIT NOT READY, AUXILIARY MEMORY NOT
ACCESSIBLE
04 11 LOGICAL UNIT NOT READY, NOTIFY (ENABLE SPINUP) REQUIRED
04 13 LOGICAL UNIT NOT READY, SA CREATION IN PROGRESS
04 14 LOGICAL UNIT NOT READY, SPACE ALLOCATION IN PROGRESS
04 1A LOGICAL UNIT NOT READY, START STOP UNIT COMMAND IN
PROGRESS
05 00 LOGICAL UNIT DOES NOT RESPOND TO SELECTION
06 00 NO REFERENCE POSITION FOUND
07 00 MULTIPLE PERIPHERAL DEVICES SELECTED
08 00 LOGICAL UNIT COMMUNICATION FAILURE
08 01 LOGICAL UNIT COMMUNICATION TIME-OUT
08 02 LOGICAL UNIT COMMUNICATION PARITY ERROR