Table of Contents
Advertisement
C. CONTROL STORE UPGRADE
5.
Proceed to Write EEPROM, described below.
Write EEPROM
1.
Type
17
and press
<
RETU RN > to sel ect the
opti on Write EEPROM.
The following menu appears on the screen:
Write EEPROM
1 - Confirm the Write EEPROM Selection
2 - Return To The Previous Menu
Enter selection choice
2.
Type 1 and press
<
RETURN> to select the
option Confirm the Write EEPROM Selection.
The following prompt appears on your screen:
Booting will use new EEPROM values. Do you
still wish
to
continue? [YIN1
3.
Type
Y.
The following message appears on the
screen:
EEPROM has been successfully written. Please
note that you must RE-BOOTthe workstation
in order for the changes you have made
to
take effect.
4.
Reboot the system and run Boot Diagnostics to
check the new configuration.
See the 1186
User's Guide for complete instructions.
CAUTION
Use the Boot Diagnostics software marked
Version 1.2h or later.
XEROX 1186 HARDWARE INSTALLATION, LYRIC RELEASE
C-7
Advertisement
Table of Contents
