Connecting The Ke~Board To The Disela - Xerox 1186 Hardware Installation

2. INSTALLING STANDARD AND OPTIONAL COMPONENTS
Connecting the Keyboard to the Display
1. Attach the keyboard cable to the display at the
right side of the display pedestal (Figure 2-9).
The notch of the large connector should be on
the top when the keyboard cable is connected
to the display.
2. Connect the other end of the keyboard cable
flush to the connector located at the rear (left
side) of the keyboard. The grooves on the
connector must be facing down and the silver
plate facing up.
DISPLAY PEDESTAL
KEYBOARD CABLE
Figure 2-9. Keyboard and Display
• oJ