Xerox 1186 Hardware Installation page 43

2. INSTALLING
STANDARD AND OPTIONAL COMPONENTS
Recordi ng the Presence of a Floppy Disk Drive
10. Record the presence of the floppy disk drive in
the space provided on the Hardware Checklist
in Appendix A, Hardware Configuration.
Closing the
Pro~essor
Unit's Rear Cover
1.
Close the rear cover of the processor by
squeezing the latches together and then firmly
pressing the rear cover to the back of the
processor. When the door is properly closed the
cover is flush with the rear panel of the
processor.
Note: If you installed a floppy disk drive, route
the floppy disk drive cable through the
top left side of the rear cover.
Securing the Cables
36
1. Unscrew the cable retention bar (Figure 2-10) at
the bottom rear of the processor unit, and place
all the cables beneath the cable retention bar.
XEROX 1186 HARDWARE INSTALLATION, LYRIC RELEASE