Table of Contents
Advertisement
2. INSTALLING STANDARD AND OPTIONAL COMPONENTS
ALIGN IC CHIP
PINS
AND SOCKET
HOLES
PUSH
TOOL
DOWN
Figure
2-12.
Inserting Chip Pins in Socket Holes
Reinstall the MPB
20
1.
Insert the MPB circuit board into slot C3. Make
sure that the sheet metal side is on the left side
and the board is lined up in the top and bottom
tracks inside the slot. Gently slide the board all
the way into the processor unit.
CAUTION
Forcing the board into the unit may damage the
connectors. If the board does not slide in easily
all the way the first time, remove it and try
again.
XEROX 1186 HARDWARE INSTALLATION, LYRIC RELEASE
Advertisement
Table of Contents
