Xerox 1186 Hardware Installation page 33

2. INSTALLING STANDARD AND OPTIONAL COMPONENTS
connecting the Cables to the Processor Unit
26
1.
Uncoil the three cables (display power cord,
display signal cable, and keyboard cable) from
the rear of the display (Figure 2-13).
\
L
]
Figure 2-13. Uncoiling Cables Attached to Display
2. If applicable, locate and uncoil the Ethernet
drop cable. If you cannot locate an Ethernet
cable, or you do not know what an Ethernet
drop cable is, contact your System
Administrator.
Note: If you have a remote or standalone
workstation, you will not have an
Ethernet drop cable.
XEROX 1186 HARDWARE INSTALLATION, LYRIC RELEASE