Table of Contents
Advertisement
3. SYSTEM CONFIGURATION UTILITY
rn
Which floppy disk drive do you have?
5. Type the number corresponding to the memory
size you have and press
<
RETU RN
>.
A question appears on the screen, asking about
an Ethernet network connection.
Do you have an Ethernet network connection?
[YIN1
6.
If you have a network connection, type Y. If you
have a standalone system which is not on a
network, type N.
A question appears on the screen, asking about
the personal computer option.
Do you have a PC Option? [YIN1
7. Type Yif you have a PCE. boardinstalled, or type
N jf you do not have a PCE board installed.
A question appears on the screen, asking about
the local printer option.
Do you have the LP Option? [YIN1
8.
Type Y if you have a local printer attached to
your processor, or type N if you do not have
local printer attached.
A question appears on the screen, asking how
many bits are needed for virtual memory.
How many bits are needed for virtual memory?
9. Type the number corresponding to the bits you
need and press
<
RETU RN
> .
A question appears on the screen, asking about
how you want diagnostics run.
Do
you
want
diagnostics
to
be
run
automatically when you reset or turn
on
your
processor? [YIN1
10. Type N.
Automatic diagnostics are
not
implemented.
Advertisement
Table of Contents
