Table of Contents
Advertisement
2. INSTALLING STANDARD AND OPTIONAL COMPONENTS
1. Make sure that your processor is in its
permanent location before poweri ng up the
. system.
CAunON
Never move a workstation when the processor
is powered up.
2. Insert the end of the power cord into the wall
outlet and switch the power button on the
processor unit to 1. This turns on the processor
(Figure 2-25).
Note: The screen should illuminate, the green
power light on the front of the
processor should' illuminate, and three
red lights below the power switch
should
cyde
through
an
on-off
sequence.
o
tmS;3-POWER.ON
SWITCH
Figure 2-25. Powering On Processor
...
_.
VI:DI"\V 110':' UADt'\\AJADC j"'ICi"Ai. ATlrl"',
Advertisement
Table of Contents
