Electronic Service Tools - Perkins 1104E Series Troubleshooting Manual

12
Troubleshooting Section

Electronic Service Tools

Electronic Service Tools are designed to help the
service technician with the diagnosis and repair of
electronic engines. Several tools are available to
assist the service technician.
Some of the included Diagnostic Functional Tests
in this manual require two short jumper wires. The
jumper wires are used to check the continuity of
some wiring harness circuits by shorting two adjacent
terminals together in a connector.
A long extension wire may also be needed to check
the continuity of some wiring harness circuits.
Electronic Service Tool
The electronic service tool can display the following
information:
•
Parameters
•
Event codes
•
Diagnostic codes
•
Engine configuration
The electronic service tool can be used by the
technician to perform the following functions:
•
Diagnostic tests
•
Sensor calibrations
• Flash programming
•
Set parameters
The following components are required to use the
electronic service tool to service the engine.
Table 1
i01798102
Required Electronic Service Tools for the Use
Part
Number
N/A
N/A
of the Electronic Service Tool
Description
Required
IBM compatible PC with
266 MHz Pentium processor
64 MB of RAM
400 MB of available hard drive space
CD-ROM drive
3.5" 1.44 MB floppy disk drive
VGA monitor or display (800 x 600)
Microsoft® Windows 2000, XP, ME,
NT 4.0, 98, or 95
RS232 port with 16550AF UART
Recommended
IBM compatible PC with
450 MHz Pentium III processor
128 MB of RAM
1 GB of available hard drive space
40X speed CD-ROM drive or
8X speed DVD drive
3.5" 1.44 MB floppy disk drive
Super VGA monitor or display (800 x 600)
Microsoft® Windows 2000, XP, ME,
NT 4.0, or 98
RS232 port with 16550AF UART
RENR2696-01