RENR2696-01
Repair: Replace the voltage load protection
module.
The voltage load protection module should also be
replaced when the fuel injection pump is replaced.
STOP.
Indicator Lamp Circuit - Test
System Operation Description:
Use this procedure under the following circumstances:
•
The lamps are not receiving battery voltage.
•
The lamps are not operating properly.
Also, use this procedure if another procedure has
directed you here.
The following diagnostic lamps are available with the
12 V system:
•
Set speed lamp
•
Warning lamp
•
Engine shutdown lamp
Illustration 107
Circuit for the indicator lamps
i01798195
195
Troubleshooting Section
g00954720