Oracle Sun Blade 6000 Product Notes page 32

Ethernet switched nem 24p 10gbe release 1.2.2
Table of Contents

Advertisement

Issues Corrected in Prior Updates
Issue
number
17435909
17435930
17435949
7128865
7101943
7096178
7128877
7116342
7116607
7100720
7153553
2221780
7152313
2221270
7174488
7167700
2222974
7174466
7174467
7007423
7042329
7174501
7174602
7174820
7174823
2221780
2221270
7035740
7187305
7187304
7184848
7179258
7187210
7206488
7179564
7186136
7207591
2198812
6899100
32
Sun Blade 6000 Ethernet Switched NEM 24p 10GbE Release 1.2.2 Product Notes • March 2016
Description of Corrected Issue
Dynamic MAC entries of the port do not get flushed on STP status change.
The port-channel state might not get reflected correctly by the show ether summary command.
Ping to broadcast IP fails over NEM.
1.2.1 IPv6 PMTU is restored after reboot.
1.2.1 shutdown opus interface does not cause nxge to show link down messages.
ACLv6 permit/deny combination is not blocking traffic.
ONEM does not return to ONET mode after reset.
SEFOS/ONET needs to be started after upgrading firmware in ONET mode and resetting SP.
SNMP error messages display wrong OID.
SLB L2: Error is seen when re-assigning a port from one LBG group to another.
Allow special characters to be included in the VLAN name.
XVLAN port delete is not handled correctly.
Watchdog exception on ONEM after shutting down Cisco 6509 port.
Add L3 functionality to XVLAN interfaces.
STP: Need to support the loop guard.
ONEM link doesn't come up after repetitive shut/no shut.
Allow debug print prior to debug thread start.
ping ipv4: Add ping command options to accept source as VLAN ID or IP address.
set port gvrp disable: Gobal gvrp disabled, but still needs to disable it on interface.
Incorrect message seen when assigning ports to port-channel repeatedly.
Save important log files so they exist even after a reset /SP command.
Better error message needed when fs_cli cannot be started.
Show CRC counters.
Do not show repeated history.
Use Oracle ILOM source for NTPD.
XVLAN port delete is not handled correctly.
Add L3 functionality to XVLAN interfaces.
Implement TACACS+ access control.
RIP with MD5 authentication: Keychain value is not preserved after save and reboot.
RIP with 2k routes: Not learning all the routes from the neighbor, and crashing after a while.
XVLAN+RIP: Route is not distributed or learned after save and reboot.
Issue with spanning-tree mst forward-time, spanning-tree mst max-age.
STP: MSTP port role and state not converged correctly during failover testing.
SLB: failover does not happen when standby node is available again.
SLB: failover does not happen when standby node is available again.
Make switch uptime and SEFOS uptime visible from Oracle ILOM.
SEFOS restarts with PVRST config.
SEFOS MIB access is lost due to the Agentx subagent dropping packets.
Garbage characters are displayed with backspace key at the login prompt.

Advertisement

Table of Contents
loading

Table of Contents