Configure Tacacs+ Settings; Issues Corrected In The Patch Update - Oracle Sun Blade 6000 Product Notes

Configure TACACS+ Settings

Configure TACACS+ Settings
Before You Begin
Note -
Management (u) role is enabled. Also ensure that you have collected all relevant information
about your TACACS+ environment, then configure the appropriate settings from Oracle ILOM
to enable authentication using TACACS+.
Log in to the Oracle ILOM CLI.
1.
2.
Navigate to the tacacs+ directory.
-> cd /SP/clients/tacacs+
3.
Use the set command to configure the TACACS+ properties.
-> set/SP/clients/tacacs+ state=enabled address=10.12.235.32
Set 'state' to 'enabled'
Set 'address' to '10.12.235.32'
4.
Use the show command to view the TACACS+ properties.
show /SP/clients/tacacs+
->
/SP/clients/tacacs+
Targets:
Properties:
address = 10.12.235.32
defaultrole = o
fs_privilege = 1
port = 49
protocol = ip
secret = *****
service = ppp
state = enabled
Commands:
cd
set
show

Issues Corrected in the Patch Update

These issues have been corrected in this update.
Issue Number
22543509
30 Sun Blade 6000 Ethernet Switched NEM 24p 10GbE Release 1.2.2 Product Notes • March 2016
Before you configure TACACS+ settings for use with SEFOS ensure that the User
Description of Corrected Issue
Fix for CVE-2015-5600 Bug 22686043. Fix for CVE-2015-3197.