Oracle Sun Blade 6000 Product Notes page 26

Fine Tune the VLAN Setup
1. Obtain the SEFOS prompt.
2. Display the default port configuration.
For example:
SEFOS#
Vlan Port configuration table
-------------------------------
Port Ex0/3
Port Vlan ID
Port Acceptable Frame Type
Port Ingress Filtering
Port Mode
Port Gvrp Status
Port Gmrp Status
Port Gvrp Failed Registrations
Gvrp last pdu origin
Port Restricted Vlan Registration
Port Restricted Group Registration : Disabled
Mac Based Support
Subnet Based Support
Port-and-Protocol Based Support
Default Priority
Filtering Utility Criteria
Port Protected Status
-------------------------------------------------------
Reconfigure the port.
3.
For example, to reconfigure the 10GbE port Ex0/3 as a tagged port in vlan 3 and allowing only
tagged frames.
SEFOS#
SEFOS(config)#
SEFOS(config-vlan)#
SEFOS(config-vlan)#
SEFOS(config)#
SEFOS(config-if)#
SEFOS(config-if)#
SEFOS(config-if)#
SEFOS#
Vlan Port configuration table
-------------------------------
Port Ex0/3
Port Vlan ID
Port Acceptable Frame Type
Only Vlan Tagged
Port Ingress Filtering
Port Mode
26 Sun Blade 6000 Ethernet Switched NEM 24p 10GbE Release 1.2.2 Product Notes • March 2016
show vlan port config port extreme-ethernet 0/3
config terminal
vlan 3
port extreme-ethernet 0/3
exit
interface extreme-ethernet 0/3
switchport ingress-filter
switchport acceptable-frame-type tagged
end
show vlan port config port extreme-ethernet 0/3
: 1
: Admit All
: Disabled
: Hybrid
: Enabled
: Enabled
: 0
: 00:00:00:00:00:00
: Disabled
: Disabled
: Disabled
: Enabled
: 0
: Default
: Disabled
: 1
: Admit
: Enabled
: Hybrid