Oracle Sun Blade 6000 Product Notes page 19

SEFOS(config)#
Exit Global Configuration mode.
c.
SEFOS(config)#
2. Configure the restoration file name.
If you are upgrading the NEM from the 1.0.x.x version, you must complete
Caution -
(disabling the incremental-save feature) to save the configuration correctly before upgrading.
a. Enter Global Configuration mode.
configure terminal
SEFOS#
b. Configure a configuration restoration file name for the NEM.
SEFOS(config)#
Exit Global Configuration mode.
c.
SEFOS(config)#
d. Disable the incremental save feature.
configure terminal
SEFOS#
SEFOS(config)#
SEFOS(config)#
3. Save the current configuration for restoration.
write startup-config
SEFOS#
4. Copy the configuration file to a remote location.
SEFOS# copy startup-config tftp://12.0.0.100/switch.conf
5. Exit and restart the NEM.
default ip address 10.0.0.100 subnet-mask 255.255.0.0
end
default restore-file myconfig.conf
end
incremental-save disable
end
Sun Blade 6000 Ethernet Switched NEM 24p 10GbE Release 1.2.2 Product Notes
Back Up the Current Configuration Before Upgrading
Step 2d
19