Oracle Sun Blade 6000 Product Notes page 24

Enable or Disable SAS2 From Oracle ILOM
show
start
stop
Enable or disable SAS2 links.
2.
■ To enable SAS2, select start.
-> cd /NEM/SAS/
/NEM/SAS
-> start
Are you sure you want to start /NEM/SAS (y/n)? y
Enabling the device will take approximately 2 minutes...
start: SAS Enabled successfully.
-> ls
/NEM/SAS
type = SAS Expander
sas_status = enabled
Commands:
cd
show
start
stop
■
To disable SAS2, select stop.
->
/NEM/SAS
Are you sure you want to stop /NEM/SAS (y/n)?
->
Disabling the device will take approximately 2 minutes...
stop: SAS Disabled successfully.
->
/NEM/SAS
type = SAS Expander
sas_status = disabled
Commands:
cd
24 Sun Blade 6000 Ethernet Switched NEM 24p 10GbE Release 1.2.2 Product Notes • March 2016
Targets:
Properties:
cd /NEM/SAS/
stop
ls
Targets:
Properties:
y