Oracle Sun Blade 6000 Product Notes page 34

Issues Corrected in Prior Updates
Issue
number
7100755
2213237
6872119
6885891
6899100
6901521
6916366
6920781
6920407
6943438
6947266
6951536
6952228
6962823
6964907
6966581
6966772
6970627
6972856
6973258
6979262
6979532
6980869
6985379
6985524
6985910
6987118
6987319
6988059
6988496
6989048
6990073
6993233
6994749
6994852
6994875
6991712
6992172
34 Sun Blade 6000 Ethernet Switched NEM 24p 10GbE Release 1.2.2 Product Notes • March 2016
Description of Corrected Issue
IP RIP authentication mode MD5 causes some routing tables not to sync or update.
Bad values are returned in the SEFOS MIB.
The output of the show interfaces int counters command is not aligned.
Disable the service account by default.
Unnecessary characters are displayed with use of the backspace key at the login prompt on the
console.
Untagged ports can show up on the default VLAN as well as where they are actually assigned.
Re-enable PVRST+.
Make Oracle ILOM enterprise MIBs available on standard SNMP ports.
SNMP request for unsupported feature MIB should not return resourceUnavailable message.
SNMP agent doesn't invoke the MIB handlers for Sun enterprise OIDs greater than 231.
ILOM backup and restore feature should support switch configuration files as well.
Add the ability to set fs_privilege attribute from the web browser.
Allow SEFOS to be stopped or started without a reboot.
Upgrading switch firmware from 1.0.1.6 to version 1.1.0.0 through the web browser fails.
64-bit counters in interface MIB are not working.
Oracle ILOM restore from the telnet console restarts the session and the user can't login again.
Oracle ILOM restore from BUI restarts the session and user can't login again.
Enable Oracle ILOM advanced user authentication methods (RADIUS, etc.)
running-config shows different interface type for port mirror monitor session configure.
QoS: Weight is incorrectly calculated.
Reduce writes to flash file system by moving /var and /tmp to tmpfs.
ServiceTag should use the swordfish UUID rather than the part number.
The create user password=password command does not create the fs_privilege attribute.
Enable DNS.
SEFOS MIB access is lost due to the agentx subagent dropping packets.
Ping fails, the switch drops ICMP echo reply packets.
Re-setting the same serial port configuration from the console causes the session to close.
Traffic is not what is expected when MTU is set to 1500 bytes.
SSH v2 should be the only version in Oracle ILOM for the switch.
Assigning a port to a VLAN does not remove the port as a member of VLAN 1.
Packets might be dropped when using Q-in-Q interoperability in certain configurations.
The NEM SP does not blink the OK LED while the SP is booting.
MIB files are missing for OSPF and some bridge OIDs.
The help password command shows some unnecessary characters.
Disabling ServiceTag doesn't close ServiceTag Listener port.
Issue with stop /NEM/fs_cli and stop /NEM/sefos.
The switch crashes when changing mtu size.
CLI - The switch's CLI does not have any commands to show counter and packet types for a queue.