Table of Contents
Advertisement
Issue
number
6992476
6993232
6993286
6993669
6993790
6994351
6996351
6997619
6998458
6999896
7000727
7001228
7002324
7004641
7005015
7008862
7014291
7030305
7030991
7057085
7068895
7078601
7082585
7082599
Known Issues
The following known issues exist at the time of this release.
"SLB-L2 Error is Seen When Reassigning a Port From One LBG Group to Another
■
(7100720)" on page 36
"SLB Must Not Allow Different VLANs in the Same Group (7095155)" on page 36
■
"SLB L2 Cannot Create More Than Two Groups, SLB L2 Limits to Two LBGs
■
(7092380)" on page 36
"Manually Deleting Static Route Does Not Affect the Corresponding SLB Entry
■
(7064092)" on page 37
"Changing the Default Value for default-vlan-id Could Result in VLAN
■
Misconfiguration (7015004)" on page 37
Description of Corrected Issue
Cannot login to Oracle ILOM.
Enable Agentx to forward OIDs originating from SEFOS.
User login name and login prompt are capitalized.
QOS: set meter command does not work with some parameters.
Email-alert is not working.
When a RADIUS user has an Oracle ILOM role of aucr, the show command in Oracle ILOM does
not work properly on the switch.
Need the remote IP address to be included in Oracle ILOM logging.
Multiple administrators configuring the switch at the same time can generate a bad configuration file.
Disabling SNMP can hang Oracle ILOM.
Events are not generated for fan faults.
Unexpected carriage return is added at end of the 1st line when displayed data spans 2 console lines.
Timezone changes are not reflected in SEFOS without restart.
QoS: set meter command failed.
The console connection should always be available.
The switch fails to power on during hot plug test.
The port-channel configuration is incompatible with range mode.
Change SEFOS incremental save SW default to disabled.
IP ACLs block ARP.
Make hostname part of the SEFOS prompt.
Add an option to show VLANs in ascending order (new token: show VLAN ascending).
NEM0 hung and required power cycling to recover. Configuration was lost.
RIP packets should not be trapped if the RIP feature is disabled.
PVRST+: Remove unused tokens.
SEFOS: Disable the hardware flow control by default.
Sun Blade 6000 Ethernet Switched NEM 24p 10GbE Release 1.2.2 Product Notes
Known Issues
35
Advertisement
Table of Contents
