Table of Contents
Advertisement
12.
Upgrade the firmware.
See
"Upgrade the NEM Firmware" on page
Upgrade the NEM Firmware
You must be logged in as root to perform the upgrade.
Note -
Before upgrading the NEM firmware, back up the current configuration as described in
Note -
"Back Up the Current Configuration Before Upgrading" on page
1.
Ensure that you have a network configuration in place on the NEM.
For more information, refer to the Sun Blade 6000 Ethernet Switched NEM 24p 10GbE User's
Guide.
2.
(Optional) If you have not restarted the NEM as part of backing up the
configuration, restart the NEM now.
The NEM might currently be low on memory. The restart frees up memory for a more
Note -
reliable upgrade.
exit
SEFOS#
reset /SP
->
Are you sure you want to reset /SP
Performing reset on /SP
3.
Use TFTP, FTP, or the Oracle ILOM web interface to copy the firmware image to
your server.
The firmware image file is Sun_Blade_6000_Ethernet_Switched_NEM_24p_10GE_sefos-
1_2_2_15.pkg.
4.
Answer the questions that appear on the screen as you proceed through the
installation.
This example illustrates the NEM upgrade process using FTP from a server with an IP address
of 192.168.1.100.
load -source ftp://username:password@192.168.1.100/
->
Sun_Blade_6000_Ethernet_Switched_NEM_24p_10GE_sefos-1_2_2_15.pkg
Downloading firmware image. This will take several minutes.
...
21.
y
Sun Blade 6000 Ethernet Switched NEM 24p 10GbE Release 1.2.2 Product Notes
Upgrade the NEM Firmware
18.
21
Advertisement
Table of Contents
