Preparing For The Rotor Mounting - HBM T40S7 Mounting Instructions

Table of Contents

Advertisement

Available languages

Available languages

Mechanical installation
5.5

Preparing for the rotor mounting

CAUTION
The rotor is very heavy (depending on measuring range: 18kg ... 39kg)!
Use a crane or other suitable lifting equipment to lift it out of its packaging and
install it.
Two eye bolts are screwed into the rotor as transport and mounting aids. Hook
the lifting equipment to these eye bolts as this ensures that the rotor is lifted
horizontally out of the packaging (see Fig. 5.1).
Transport and mounting eye bolts
Fig. 5.1
Transport and mounting eye bolts on the rotor
1. Lift the rotor out of the packaging, rotate horizontally by 180_, so that flange
B is pointing upwards (see Fig. 5.1).
20
A3276-11.0 HBM: public
T40FM

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

T40fmT40s8T40s9

Table of Contents