Stator Status, Led B (Lower Led) - HBM T40S7 Mounting Instructions

Color
Pulsating orange
Red (pulsating)
Pulsating means that the LED goes dark for about 20 ms every second (sign of
life), making it possible to detect that the transducer is functioning.
8.2

Stator status, LED B (lower LED)

Color
Green
(permanently lit)
Green, intermittently
orange.
Numerous
synchronization
defects:
permanently orange
Orange
(permanently lit)
Red
(permanently lit)
T40FM
Significance
Rotor status cannot be defined
=> Correct the rotor/stator alignment
If the LED still pulsates orange, it is possible that there is a
hardware defect. The measurement signals reflect the level of
the fault.
Rotor voltage values not ok.
=> Correct the rotor/stator alignment
If the LED still pulsates red, it is possible that there is a
hardware defect. The measurement signals reflect the level of
the fault.
Significance
Measurement signal transmission and internal stator voltages
ok
Orange until end of defective transmission if y5 incorrect
measured values are transmitted in succession. The
measurement signals reflect the level of the defect status for
the duration of the transmission defect + for approx. another
3.3ms.
Permanently disrupted transmission, the measurement
signals reflect the level of the fault. (f
level).
=> Correct the rotor/stator alignment.
Internal stator defect, the measurement signals reflect the
level of the fault (f
A3276-11.0 HBM: public
= 0 Hz, U = defect level).
out out
Functionality testing
= 0 Hz, U = defect
out out
45