Installing The Stator - HBM T40S7 Mounting Instructions

Mechanical installation
Important
Dry screw connections can result in different and higher friction factors (see
VDI 2230, for example). This means a change to the required tightening mo­
ments.
The required tightening moments can also change if you use screws with a sur­
face or property class other than that specified in Tab. 5.1, as this affects the
friction factor.
5.7

Installing the stator

On delivery, the stator has already been installed and is ready for operation.
The upper antenna segment can be separated from the stator, for example, for
maintenance or to facilitate stator mounting.
Antenna segment screws
with washers (M5)
Fig. 5.5 Bolted connection of the antenna segments on the stator
26
Fan-type lock
washers
A3276-11.0 HBM: public
M5 hole for fixing the
antenna segment
upper
Antenna segments
lower
Stator housing
T40FM