EMC Connectrix B Series Hardware Reference Manual page 94

Remove and Replace System Components
swDir:admin> firmwaredownload -s
Server Name or IP Address: 192.168.100.1
User Name: user
File Name: /software/v5.0.1/release.plist
Password: ********
Do Auto-Commit after Reboot [Y]:
Reboot system after download [N]:
Firmwaredownload has started.
2005/03/07-14:59:21, [SULB-1001], 923,, WARNING,
has started.
Start to install packages......
dir
ldconfig
glibc
bash
readline
terminfo
termcap
setup
<output truncated>
tz
mtracer-tool
lkcd
sysstat
Removing unneeded files, please wait ...
Finished removing unneeded files.
All packages have been downloaded successfully.
Firmwaredownload has completed successfully.
94
EMC Connectrix B Series ED-48000B Hardware Reference Manual
Secondary Partition:
Remote CP (Slot 5, CP0): Standby
Primary partition:
Secondary Partition:
Note: If Local CP and Remote CP have different versions
of firmware, please retry firmwaredownload command.
swDir:admin>
7. If the firmware version on the replacement blade does not match
that on the active CP blade, bring the replacement blade to the
same firmware level as the active blade. Check with your EMC
service representative for supported versions.
8. Type firmwareDownload -s to download the firmware to only
one of the CP blades. Enter all requested information (use default
values):
##################################################
##################################################
##################################################
##################################################
##################################################
##################################################
##################################################
##################################################
##################################################
##################################################
##################################################
##################################################
v5.0.1
v5.0.1
v5.0.1
48000
, Firmwaredownload command