EMC Connectrix B Series Hardware Reference Manual page 38

Installation, Setup, and Login
38
EMC Connectrix B Series ED-48000B Hardware Reference Manual
6. Log in to the ED-48000B as admin. The default password is
"password". At the initial login, you are prompted to enter new
admin and user passwords. Make sure to write down the new
passwords and keep this information in a secure location.
Fabric OS (swDir)
swDir login: admin
Password:
Please change your passwords now.
Use Control-C to exit or press 'Enter' key to proceed.
Password was not changed. Will prompt again at next login
until password is changed.
swDir:admin>
7. (Optional) Modify passwords, if desired. Passwords can be 8 to 40
characters long. They must begin with an alphabetic character.
They can include numeric characters, the dot (.), and the
underscore ( _ ). Passwords are case-sensitive, and they are not
displayed when you enter them on the command line. To skip
modifying the password, press
passwords, refer to the Fabric OS Administrator's Guide.
8. Check the "Active CP" LED on the CP blades in slots 5 and 6, or
type haShow to verify which CP blade is active.
swDir:admin> hashow
Local CP (Slot 6, CP1): Active
Remote CP (Slot 5, CP0): Standby, Healthy
HA enabled, Heartbeat Up, HA State synchronized
The configuration can be modified only through a login session to
the active CP blade.
. For more information on
C -C
TRL