EMC Connectrix B Series Hardware Reference Manual page 120

Chassis Replacement
Table 13
120
EMC Connectrix B Series ED-48000B Hardware Reference Manual
8. Type supportShow; then, copy the command output into a text
file named "spptshow.txt".
Note: The supportshow command has very long output and can take
several minutes to complete.
This file provides a backup of all the information that might be
required by Technical Support. The information can be used after
the switch is restored to the fabric, to verify that no unintentional
changes have occurred to the fabric.
swDir:admin> supportshow
version: 5.0.1
<output truncated>
swDir:admin>
9. Record the cable connections between the ED-48000B and the
target device and ports (refer
Critical information checklist
Configuration information
Location of "config-switch.txt" file:
Location of "config-miscinfo.txt" file:
IP address, subnet mask:
WWN for director:
SAN profile
Location of "SANbefor.txt" file:
Notes regarding nsshow output:
Notes regarding nsallshow output:
Notes regarding switchshow output:
Notes regarding fabricshow output:
Output from supportshow command
Location of "spptshow.txt" file:
Notes regarding supportshow output:
"Cable routing tables" on page 137).