EMC Connectrix B Series Hardware Reference Manual page 69

Table 9
LED purpose
Port blade/CP blade Power
Port blade/CP blade Status
Note: If a blade slot or power supply bay has a filler panel installed, the corresponding LEDs on the WWN blade do not light up.
Power supply
Power/Status
Table 9 describes the WWN bezel LED patterns and the
recommended actions for those patterns for the ED-48000B.
WWN bezel LED descriptions
Color
Steady green
Steady amber
No light (LED is OFF)
Steady green
Steady amber
Note: If a Status LED on the WWN bezel flashes, the Power LED on the
WWN bezel also flashes, for increased visibility.
Status Recommended action
Power is OK. No action required.
Blade is faulty. Check blade.
Blade is OK. No action required.
Power is OK. No action required.
Power supply is faulty. Check power supply.
Monitor System Components
WWN card
69