EMC Connectrix B Series Hardware Reference Manual page 68

Monitor System Components
Table 8
Type of Message
WWN unit fails its FRU (field
replaceable unit) header access.
WWN unit is being faulted.
WWN unit is not present or is not
accessible.
Writing to the FRU history log
(hilSetFruHistory) has failed.
Figure 11
68
EMC Connectrix B Series ED-48000B Hardware Reference Manual
WWN units correspond to information specific to the WWN card
and are displayed by typing the chassisShow command.
Messages that can indicate WWN card failure
Sample Error Message
0x24c (fabos): Switch: switchname, error EM-I2C_TIMEOUT,
2, WWN 1 I2C timed out: state 0x4
0x24c (fabos): Switch: switchname, Critical
EM-WWN_UNKNOWN, 1, Unknown WWN #2 is being faulted
0x24c (fabos): Switch: switchname, Error EM-WWN_ABSENT,
2, WWN #1 not present
0x24c (fabos): Switch: switchname, Error EM-HIL_FAIL, 2,
HIL Error: hilSetFruHistory failed, rc=-3 for SLOT 3
Figure 11 displays the WWN bezel supported by the ED-48000B.
1
2
1 2
WWN bezel supported by the ED-48000B
1 Port Blade Power LED
2 Port Blade Status LED
3 CP Blade Power LED
4 CP Blade Status LED
3
scale:
5/16" = 1"
4
3 4 5 6 7 8 9 10
6
5 Power Supply Power LED/Status LED
6 Badge
7 Captive Screw
5
pwr4
pwr3
pwr2
pwr1
7