Installation Planning; Before Installing - Valor LT1 2500KN Installation Manual

Installation Planning

Caution
Only qualified, license, or trained personnel
should install this appliance.
1. YOU NEED TO KNOW FROM THE HOMEOWNER:
• Height of appliance and shelf, if used;
• Thickness and type of wall fi nish around
appliance;
• Trim used;
• Optional accessories used (if any);
• Venting confi guration.
2. Unpack the appliance, removing all items packed
inside and around it. Recycle the packaging.
3. Check that you have everything, using the Pack Con-
tent sheet. Also, check that you have:
• Fuel bed (packed separately);
• Liner panels (packed separately);
• Remote Battery and Wall Switch Kit;
• HeatShift System components;
• Gas conversion kit (if necessary);
• Venting accessories;
• Non-combustible board;
• Electrical accessories (if used).
4. Carefully read the Installer's Checklist included with
the fi replace for the installation sequence.
WARNING
HeatShift System MUST be installed on
this appliance!

Before Installing

9