Table of Contents
Advertisement
Installation Planning
Caution
Only qualified, license, or trained personnel
should install this appliance.
Before Installation
1. YOU NEED TO KNOW FROM THE HOMEOWNER:
•
Whether any facing material will be used over
the existing fi replace.
•
What trim, front, and optional accessories (if
any) will be installed with this unit.
2. Unpack the appliance and recycle the packaging.
3. Check that you have everything, using the Pack Con-
tent sheet. Also, check that you have:
•
A fuel bed (packed separately)
•
Liner panels (packed separately)
•
Venting accessories
•
Electrical accessories (if using a fan kit)
•
Any other ordered accessories
4. Carefully read the Installers Checklist included with
the fi replace for the installation sequence.
Before Installation
Note
The following steps must be done BEFORE the
appliance is placed in its final position, since
the connections are done from the back of the
appliance:
•
Electrical connections (if needed for fan kit)
WARNING
Optional electrical accessories ARE NOT
ALLOWED when adapting appliance for
outdoor use.
11
Advertisement
Table of Contents
