Ip Protocol Support; Serial Data Communication Over Tcp And Udp - Digi Connect Wi-SP User Manual

Digi Connect and ConnectPort TS Family features

IP protocol support

All Digi Connect and ConnectPort TS Family devices include an on-board TCP/IP stack with a built-in
web server. Supported protocols vary by specific product and include, unless otherwise noted:
Transmission Control Protocol (TCP)
n
User Datagram Protocol (UDP)
n
Dynamic Host Configuration Protocol (DHCP)
n
Simple Network Management Protocol (SNMP)
n
Secure Sockets Layer (SSL)/Transport Layer Security (TLS)
n
Remote login (rlogin)
n
Line Printer Daemon (LPD)
n
HyperText Transfer Protocol (HTTP)/HyperText Transfer Protocol over Secure Socket Layer
n
(HTTPS)
Simple Mail Transfer Protocol (SMTP)
n
Internet Control Message Protocol (ICMP)
n
Internet Group Management Protocol (IGMP)
n
Address Resolution Protocol (ARP)
n
Advanced Digi Discovery Protocol (ADDP)
n
Network Address Translation (NAT)/Port Forwarding (only some products have NAT)
n

Serial data communication over TCP and UDP

Digi Connect and ConnectPort TS Family products support serial data communication over TCP and
UDP. The key features include:
Serial data communication over TCP can automatically perform the following functions:
n
Establish bi-directional TCP connections, known as autoconnections, between the serial
l
device and a server or other network device. Autoconnections are based on data and/or
serial hardware signals.
Control forwarding characteristics based on size, time, and pattern.
l
Allow incoming raw, telnet, and SSL/TLS (secure-socket) connections.
l
Support RFC 2217, an extension of the telnet protocol.
l
Serial data communication over UDP can automatically perform the following functions:
n
Digi Connect products can automatically send serial data to one or more devices or
l
systems on the network using UDP sockets. Options for sending data include whether
specific data is on the serial line, a specific time period has elapsed, or after the specified
number of bytes has been received on the serial port.
Control forwarding characteristics based on size, time, and patterns.
l
Support incoming datagrams from multiple destinations.
l
Support outgoing datagrams sent to multiple destinations.
l
TCP/UDP forwarding characteristics.
n
Digi Connect Family and ConnectPort TS Family
IP protocol support
11