Wavetronix SmartSensor Matrix User Manual page 9

8
SmartSensor Matrix User Guide
•
A SmartSensor Matrix quick start guide
˿
The following aren't automatically included, but are necessary for
installation:
Sensor mount
˿
SmartSensor 6-conductor cable
˿
To support the sensor installation, you may need to order devices for
power conversion, surge protection and communication, including
some or all of the following:
Click 104 four-channel DIN rail contact closure module
˿
Click 112/114 detector rack card(s) with patch cable(s)
˿
Click 201/202/204 AC to DC converter
˿
Click 210 circuit breaker
˿
Click 221 DC surge protector
˿
Click 222 system surge protector
˿
Click 230 AC surge protector
˿
Click 301 serial to Ethernet converter
˿
You can also get these devices preassembled and prewired in cabinet
backplates, or use a Click 600, Click 650, or Click 656, which provide the
same functionality in a single module.
Service information
Don't try to service or repair this unit; none of its components or
parts are serviceable in the field. Attempting to open this unit, unless
expressly directed by Wavetronix, will void the customer warranty.
Wavetronix is not liable for any bodily harm or damage caused if
unqualified persons attempt to service or open the back cover of
this unit. Refer all service questions to Wavetronix or an authorized
distributor.
Important note
Failure to follow the installation guidelines laid out in this guide could
result in decreased performance. If you believe it is necessary to deviate
from these guidelines, contact a Wavetronix application engineer or
technical support for assistance and recommendations.