Updating The Sensor - Wavetronix SmartSensor Matrix User Manual

Hide thumbs Also See for SmartSensor Matrix:

Table of Contents

Updating the sensor

Figure 35. Version Control basic screen and detailed screen

If the version of SSMM doesn't match the version of the sensor's

embedded firmware, then after you click Connect, the Version Con-

trol screen will appear.

If you would like specifics on the mismatch, click a sensor ID and

then click the Details >> button.

Click UPLOAD FIRMWARE, or, if you prefer not to update at this

time, click Close.

Advanced settings

Backup/Restore – This backs up all of the settings for the sensor(s)

before the upload. When the upload is finished, it will restore the

settings.

Upload to all sensors – This setting broadcasts the upgrade to all the

sensors on the control bridge.

Disable fast pacing – Check this box if you are connected using

Bluetooth or other devices with a slow connection speed.

Chapter 4: Connecting to the Sensor

•

Table of Contents

Do you have a question about the SmartSensor Matrix and is the answer not in the manual?