Wavetronix SmartSensor Matrix User Manual page 41

40
SmartSensor Matrix User Guide
•
Setting Description
Response How long the sensor will
Delay
wait before responding to
a received message, shown
in milliseconds. Default is
10 ms.
Port 1
Port usually reserved for
(Control)
connecting and configuring
the sensor.
Port 2 (Data)
Port usually reserved for
pushing data.
Green Arrow Shows the port over which
SSMM is connected to the
sensor.
Data Push
Lets you choose which port
you want to use to push
presence data.
Source
Lets you choose where the
SSMM gets the traffic data
it reports.
Details
The default setting is 10
milliseconds. Please contact
Wavetronix Technical
Support before changing
this setting.
Please contact Wavetronix
Technical Support before
changing this setting.
Please contact Wavetronix
Technical Support before
changing this setting.
N/A
Please contact Wavetronix
Technical Support before
changing this setting.
Choose Antenna for
standard use (reports data
as detected by the sensor).
Choose Diagnostic for
testing and training (creates
simulated traffic).