Changing Ports Tab Settings - Wavetronix SmartSensor Matrix User Manual

Setting
RF Channel
Sensor Height
Units

Changing Ports tab settings

Description
Lets you change
the radio frequency
channel the sensor is
transmitting on.
Lets you enter the
sensor's height.
Sets whether the
software displays
distances in
standard (mph/feet) or
metric (kph/meters).
Figure 39. Ports tab
Details
If you're using multiple
sensors in the same
intersection, set each to
a unique RF channel.
The software should
notify you when an
RF channel needs to
change.
Entering an
approximate height
allows vehicles to be
shown at the correct
distance in the
software.
Purely for your
convenience—does
not affect sensor
performance.
Chapter 5: Configuring Sensor Settings
39
•