Configuration - Siemens SIMATIC NET SCALANCE W780 Series Configuration Manual
Industrial wireless lan scalance w780/w740 to ieee 802.11n web based management
Hide thumbs
Also See for SIMATIC NET SCALANCE W780 Series:
- Configuration manual (317 pages) ,
- Reference manual (84 pages)
Table of Contents
Advertisement
● Link
Shows the connection status to the network. With the connection status, the following is
possible:
– up
– down
● Mode
Shows the transmission speed and the transmission method of the port.
● MTU (Maximum Transmission Unit)
Shows the packet size.
● Negotiation
Shows whether the automatic configuration is enabled or disabled.
● MAC Address
Shows the MAC address of the port.
6.6.1.2
Configuration
Configuring ports
With this page, you configure the Ethernet ports of the device.
Note
SCALANCE W786-2 SFP
The two SFP ports of the SCALANCE W786-2 SFP cannot be assigned parameters or
diagnosed individually.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
The port has a valid link to the network, a link integrity signal is being received.
The link is down, for example because the connected device is turned off.
Configuring with Web Based Management
6.6 "Interfaces" menu
267
Hide quick links:
Advertisement
Table of Contents
