Siemens SIMATIC NET SCALANCE W780 Series Configuration Manual page 219

Requirements for the DHCP server
● In access point mode
– The connected devices are configured so that they obtain the IPv4 address from a
● In client mode
– The connected devices are configured so that they obtain the IPv4 address from a
– NAT is enabled. You enable NAT in "Layer 3 > NAT"
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13
DHCP server.
DHCP server.
Configuring with Web Based Management
6.5 "System" menu
219