Siemens SIMATIC NET SCALANCE W780 Series Configuration Manual page 192

Configuring with Web Based Management
6.5 "System" menu
Description
The page contains the following boxes:
● DNS client
If the check box is enabled, the "DNS client" function is enabled.
● Used DNS Servers
Here you specify which DNS server the device uses:
– learned only
– manual only
– all
● DNS Server Address
Enter the IP address of the DNS server.
The table for the DNS servers with the following columns:
● Select
Select the check box in the row to be deleted.
● DNS Server Address
Shows the IP address of the DNS server.
● Origin
This shows whether the DNS server was configured manually or was assigned by DHCP.
192
The device uses only the DNS servers assigned by DHCP.
The device uses only the manually configured DNS servers. The DNS servers must
be connected to the Internet. A maximum of three DNS servers can be configured.
The device uses all available DNS servers.
SCALANCE W780/W740 to IEEE 802.11n Web Based Management
Configuration Manual, 08/2018, C79000-G8976-C267-13